Inconel 601 is Nickel Chromium, solid solution strengthened alloy with good resistance to oxidation and corrosion at high temperatures. It also has excellent hot and cold workability and welding performance. When below 700ºC, it has good heat resistance and high ductility. Inconel 600 can be strengthened by cold working. It can be connected via resistance welding, solvent welding and brazing. It is suitable for producing antioxidant parts which bear low load below 1100ºC.Good resistance of reduction, oxidation and corrosion of nitride dielectric Good resistance of dry chlorine and hydrogen chloride gas corrosion Excellent mechanical behavior below zero degree and at atroom temperature and high temperature Chemical Composition | Inconel 600 | Ni | Cr | Fe | C | Mn | Si | Cu | Al | Ti | B | P | S |
| minimun | | 14 | 6.0 | | | | | | | | | |
| maximum | 72 | 17 | 10.0 | 0.15 | 1.0 | 0.5 | 0.5 | 0.3 | 0.3 | 0.006 | 0.015 | 0.015 |
| Product Form | Size Range From | Size Range To |
| Alloy C276 Coil | 1.6 mm | 3.05 mm |
| Alloy C276 sheet & plate | 0.63 mm | 76.2 mm |
| Alloy C276 round tubing | 0.25 in | 1 in |
| Alloy C276 round bar | 3.175 mm | 280 mm |
| Alloy C276 pipe fitting | 0.5 in | 24 in |
| Alloy C276 pipe | 0.5 in | 24 in |
| Alloy C276 flanges | 0.5 in | 24 in
|
Product form
All products of the company according to the United States ASTM/ASME, Germany DIN, Japan JIS standard supply, with China's national steel executive standard synchronization, and can supply according to the standards and technical requirements of the customers, for product shape: plate, belt, tubes, rods, forgings, pipe fittings, flanges, welding materials, etc..
Super austenitic stainless steel series: 904 l (UNS N08904, 1.4539) 254 smo/SMO254 (UNS S31254, 1.4547), 1.4529 (UNS N08926, 25-6 mo) AL - 6 xn (UNS N08367)
Hartz alloy series (HASTELLOY) : hartz alloy C - 276 (UNS N10276, 2.4819) hartz alloy C - 22 (2.4602) UNS N06022, hartz alloy C - 4 (2.4610) UNS N06455, hartz alloy C - 2000 (UNS N06002, 2.4675) hartz alloy B - 2 (2.4617) UNS N10665, hartz alloy B - 3 G (UNS N10675, 2.4600) hartz alloy - 30 G - 35 (UNS N06030) hartz alloy (UNS N06035)
Special dual phase steel series: 2205 (UNS S31803, S32205, 1.4462) 2304 (UNS S32304, 1.4362) 2507 (UNS S32570, 1.4410)
: cobalt base alloy GH188, GH605, GH783
Soft magnetic alloy: 1 j22, j36, 1 j50, 1 j76, 1 j77, 1 j79, 1 j85
Permanent magnet alloy, 2 j4, 2 j21-serial open-style, j31, 2 j63, 2 j83
Corrosion resistant alloy: NS111, NS112, NS113, NS131, NS141, NS142, NS143, NS311, NS312, NS313, NS314, NS315, NS321, NS322, NS331, NS332, NS333, NS334, NS335, NS336, NS337, NS341, NS411
monel:
MONEL400,UNS N04400,2.4360)(MONEL500,UNS N05500,2.4375)
inconel,incoloy:
(INCONEL600,UNS N06600,2.4816)(INCONEL601,UNS N06601,2.4851)(INCONEL686,UNS N06686,2.4606)(INCONEL690,UNS N06690,2.4642)(INCONEL718,UNS N07718,2.4668)(INCONEL750,UNS N07750,2.4669)(INCONEL725,UNS N07725)(INCONEL617,UNS N06617,2.4663)(INCOLOY800,UNS N08800,1.4876)(INCOLOY800H,UNS N08810,1.4876)(INCOLOY800HT,UNS N08811,1.4876)(INCOLOY825,UNS N08825,2.4858)(INCOLOY925,UNS N09925)(INCOLOY20,UNS N08020,2.4660)(INCOLOY28,UNS N08028,1.4563)(INCOLOY330,UNS N08330,1.4886)
Sales area:
Power plant desulfurization denitration, petrochemical equipment, chemical, fluorine chemical industry, fine chemical, PTA, environmental protection, water desalination, papermaking machinery, pharmaceutical equipment, heat exchange equipment, electrochemical, nuclear power, metallurgy, Marine platform, chlor-alkali, shipbuilding, cement manufacturing, explosion composite, acetic anhydride, acetic acid salt, medical equipment, sports leisure and plate heat exchanger, bellows expansion joint compensator, etc.
| Grade | C | Si | Mn | S | P | Cr | Ni | Fe | Al | Ti | Cu | Mo | other |
| Inconel 600 | ≤0.15 | ≤0.5 | ≤1.0 | ≤0.015 | ≤0.03 | 14.0-17.0 | balance | 6.0-10.0 | --- | --- | ≤0.5 | --- | --- |
| Inconel 601 | ≤0.10 | ≤0.5 | ≤1.0 | ≤0.015 | ≤0.03 | 21.0-25.0 | balance | 10.0-15.0 | 1.0-1.70 | --- | ≤1.0 | --- | --- |
| Inconel 625 | ≤0.10 | ≤0.5 | ≤0.5 | ≤0.015 | ≤0.015 | 20.0-23.0 | balance | ≤5.0 | ≤0.4 | ≤0.4 | --- | 8.0-10.0 | Co≤1.0 |
| Inconel 718 | ≤0.08 | ≤0.35 | ≤0.35 | ≤0.015 | ≤0.015 | 17.0-21.0 | 50.0-55.0 | balance | 0.2-0.8 | 0.65-1.15 | ≤0.3 | 2.8-3.3 | B≤0.006 |
| Inconel x-750 | ≤0.08 | ≤0.5 | ≤1.0 | ≤0.010 | ≤0.020 | 14.0-17.0 | balance | 5.0-9.0 | 0.4-1.0 | 2.25-2.75 | --- | --- | --- |
